
Production Enhancer - Walking Beam Gas Compressor
Manufactured,
sold and serviced by Annugas Compression Consulting Ltd. ANNUGAS
PRODUCTION ENHANCER® is a single cylinder; double
acting gas compressor that is operated by the walking
beam of
a pumping unit.
The ANNUGAS PRODUCTION ENHANCER® double
acting gas compressor's main function is to draw gas from the
casing side of the well and to discharge the gas into the flow
line. By doing so the
ANNUGAS PRODUCTION ENHANCER® reduces gas
back-pressure on the formation face, thus allowing additional
oil to enter the well bore.
The ANNUGAS PRODUCTION ENHANCER® demonstrates its ability
as a low cost and efficient gas compressor because of its applicability
and its mobility. It carries out its designed function of lowering
casing pressure.
ANNUGAS PRODUCTION ENHANCER®
BOOSTS PRODUCTION
Annugas Compression Consulting Ltd. is improving oil and gas
production with a beam gas compressor.
Once installed on the walking beam of a pumpjack, the 'ANNUGAS
PRODUCTION ENHANCER®'
removes gas that can accumulate during oil production. By drawing
off the gas and discharging it into the flowline, back pressure
downhole is reduced allowing more fluid to flow out from the
formation. The results can be increased production and smoother
well operation.
The 'ANNUGAS PRODUCTION ENHANCER®' also
allows recovery of vapors from on site processing and storage
equipment, assists in decreasing gas locking situations and compress
methane gas from surface casing vents into the flowline.
If casing pressure is high in relation to formation pressure,
some of the free gas enters into the pump barrel causing gas
locks and reducing the pump volumetric efficiency. By reducing
the casing pressure on wells with low formation pressures, gas
volumes entering the pump barrel are minimized and gas lock problems
are reduced. The free gas is diverted into the annulus and produced
with the assistance of the 'ANNUGAS PRODUCTION ENHANCER®'.
While compressors for controlling casing pressure are not new,
they have not nearly reached their capabilities and potential
in the field. Some models have caused problems, typically by
being misapplied or installed incorrectly. When properly applied,
the 'ANNUGAS PRODUCTION ENHANCER®' can typically
improve oil production by about 85%. One application improved
production from 6 cubic meters a day to 36 cubic meters a day
- overnight.
With a totally non-lube design, there is absolutely no daily
maintenance and no environmental cleanup. If a unit has operated
for two years and has nothing done to it, we suggest it be taken
down and gone through.
Applications for 'ANNUGAS PRODUCTION ENHANCER®' include
wells with low formation pressure and low solution gas. |